6 - Operation
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 40 of 60 (
D998200129-10
)
6.2.3
Health and Safety Information
The device implements electronic labels (“e-labels”) that report its
Health and Safety
certification
information. To access them, press the sequence
Left Function Key
,
7
,
8
,
0
,
Right function key
.
This brings up a page similar to
, with indicators on the bottom that show more information is
available by scrolling. Press
Left Function Key
and
Right Function Key
to scroll to the previous and
next e-label. To return to the
Welcome
screen, press the
Cancel
key, or wait 10 seconds.
Figure 6-6 - Health and Safety Screen 1
6.2.4
Wireless Status Screen
In addition to the icons at the top of the display, the device has a
Wireless Status
screen that reports
deeper details about the wireless connection. To access it, press the sequence
Left Function Key
,
6
,
2
,
2
,
Right function key
. This brings up a screen similar to
. To return to the
Welcome
screen, press the
Cancel
key.
Figure 6-7 - Wireless Status Screen
For compatibility with similar MagTek devices, this screen may also launch with keystrokes
Left
function key
4
7
2
Right function key
.
