Magnetek MHR, Руководство пользователя

Страница: 40 / 59

MHR Radio Controller Instruction Manual
June 2017
Page 39 of 58
4.4 LED STATUS INDICATION
The MHR has two LEDs for indicating the MHR status at a glance during normal operation. The
left LED indicates the MHR’s status while the right LED indicates power/communication.
4.4.1 STATUS/ERR LED (left LED on MHR faceplate)
Solid Green = Okay, no errors present
Solid Red = Error
Check the main screen for the error code, and then refer to Section 7.0 for troubleshooting and
alarm code tables.
4.4.2 PWR/COMM LED (right LED on MHR faceplate)
Solid Blue = MHR is powered on
Solid Green = Active communication with transmitter
NOTE: The PWR/COMM LED illuminating solid green only occurs during the sending and
receiving of data from the transmitter. When no data is being sent or received, the LED will
illuminate a solid blue.
NOTE: PWR/COMM only illuminates green when receiver is online with the transmitter. The
PWR/COMM will not illuminate green after the transmitter goes offline from the receiver. This can
occur when the transmitter powers down from inactivity or goes out of range. The start switch on
the transmitter must be toggled to bring the transmitter back online with the receiver.
STATUS/ERR
Indication LED
PWR/COMM
Indication LED