Magnetek MHR, Руководство пользователя

Страница: 13 / 59

MHR Radio Controller Instruction Manual
June 2017
Page 12 of 58
WARNING
UNSTABLE LOADS OR EQUIPMENT CAN LEAD TO UNSAFE CONDITIONS IN SOME EQUIPMENT.
THE INSTALLER SHOULD BE AWARE OF THESE RISKS AND INSTALL THE RADIO CONTROLLER IN
A MANNER THAT MINIMIZES UNSTABLE EQUIPMENT OR LOAD CONDITIONS. FAILURE TO FOLLOW
THIS WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
WARNING
SOME EQUIPMENT THAT CAN BE INTERFACED WITH THIS RADIO CONTROLLER WILL HAVE
MANUAL CONTROLS INSTALLED. THE INSTALLER SHOULD BE PROPERLY QUALIFIED TO INSTALL
MANUAL CONTROLS AND SHOULD BE AWARE OF RISKS IN UTILIZING RADIO AND MANUAL
CONTROLS AT THE SAME TIME ON THE EQUIPMENT. FAILURE TO FOLLOW THIS WARNING
COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
WARNING
OVERLOADING THE EQUIPMENT CAN LEAD TO HAZARDOUS CONDITIONS IN SOME EQUIPMENT.
THE INSTALLER SHOULD BE AWARE OF THESE RISKS AND INSTALL THE RADIO CONTROLLER IN
A MANNER THAT MINIMIZES EQUIPMENT OVERLOADING CONDITIONS. MAGNETEK’S RADIO
CONTROLLER CAN BE CONFIGURED AND/OR INTEGRATED TO MINIMIZE OVERLOADING
CONDITIONS. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY OR
DEATH AND DAMAGE TO EQUIPMENT.
2.1 PRE-INSTALLATION
1. Transmitter and receiver access code and channel must match before the system will
communicate.
2. Be aware of other radio channels in the surrounding area; set your system to a unique
channel.
3. Make sure that your equipment is working properly in manual mode prior to system
installation.
4. Make sure the power to the receiver is the correct DC voltage.
5. Disconnect equipment power prior to system installation.