Magnetek MHR, Руководство пользователя

Страница: 24 / 59

MHR Radio Controller Instruction Manual
June 2017
Page 23 of 58
3.0 CONFIGURING THE MHR
The Setup Mode can be used to edit configuration settings so that the MHR can be used in many
different scenarios.
NOTE: No parameter changes will take effect until the user has selected ‘Save and Exit’ from the
Setup Mode.
3.1 ENTERING SETUP MODE
To enter the setup mode, hold the
UP
and
BACK
buttons at the same time. If the password
feature is enabled on the MHR, you will be prompted for a password prior to entering setup mode.
Example for entering setup mode on the MHR is as follows:
Press and hold and together at the same time for 5 seconds. When the buttons are
properly pressed, the Enter Password screen or Setup Mode menu screen will be displayed.
Figure 10: Enter Password screen
Enter Password Screen:
Enter the password one digit at a time. The password can range from
0000 to 9999.
Use the and arrows to change the values and and to cycle through each
digit.
After the last digit is entered on the far right side of the password enter screen, press to
enter setup menu.
NOTE: The factory default password is 3579.