Magnetek MHR, Руководство пользователя

Страница: 51 / 59

MHR Radio Controller Instruction Manual
June 2017
Page 50 of 58
Alarm
Number
Alarm
Text
Cause of alarm Effect of alarm Recovery Action
25
S25. OUT
10 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
26
S26. OUT
11 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
27
S27. OUT
12 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
28
S28. OUT
13 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
29
S29. OUT
14 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
30
S30. OUT
15 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system
31
S31. OUT
16 OC
ERR
When the output was
activated, a current of
over 3.5A was being
drawn by the output.
The output was shut
off to prevent damage
to the hardware.
Output is shut off and will
not operate until the cause
is fixed and power to the
system is cycled
Determine what has caused the
overcurrent draw, fix the cause,
and power cycle the system