![background image](http://html1.mh-extra.com/html/magnetek/2001-g-m/2001-g-m_instruction-manual_3598661127.webp)
IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
5-67
Sets a function to prevent stalling during an overload condition while running at constant speed.
Table 5-9:Stall Prevention Run Selection
Parameter
Code
Name
Function
Range
Initial
Value
Access
Level
L03.05
Stall Prevention Run
Select
Enable/Disable stall
prevention during running
00–02
01
Basic/Adv
00 Disable
See Table 5-9
01 Decel Time 1
See Table 5-9
02 Decel Time 2
See Table 5-9
Setting
Description
00 Disable
Stall prevention/current limit during running is disabled.
01 Decel Time 1
Stall prevention/current limit during running is enabled (factory default). When
the inverter output current exceeds the current limit level (L03.06) for more than
100ms during speed agree, the output frequency is decreased according to
deceleration time 1 (B05.02). This can help prevent stalling. When the load
condition is stabilized, the inverter accelerates to the previous frequency.
02 Decel Time 2
Stall prevention/current limit running is enabled as in setting “01”, however the
output frequency is decreased according to deceleration time 2 (B05.04).
Содержание 2001-G+M
