![background image](http://html1.mh-extra.com/html/magnetek/2001-g-m/2001-g-m_instruction-manual_3598661081.webp)
IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
5-21
Phantom Stop
The Phantom Stop feature is designed to stop the drive operation using the stopping method selected
in C03.09 when a Phantom Fault input (H01.01–H01.07 = 5F or 63) is active. The drive will indicate
a Phantom Fault has occurred by blinking the LED on the RUN key in sequence of two short bursts.
The drive will resume normal operation when a Phantom Fault is removed.
Klixon Action
The Klixon Multi-Function input is intended for motors that have a Motor Thermal Overload Switch
called a Klixon. The Klixon is usually embedded in the motor windings, and changes state when the
motor reaches a certain temperature. When a multi-function input (H01.01~H01.07 = 56 or 57) is
active, the drive will use the stopping method programmed in C03.11 and display the oL8 Klixon
alarm. The drive will resume normal operation when the motor cools down and the input changes
state for normal operation.
Parameter
Code
Name
Function
Range
Initial Value
Access
Level
C03.09
Phantom Stop Selection
Stopping Method when
Multi-Function Input
H01.01–H01.07 = 5F or 63
(Phantom Fault)
00–02
01
Adv
00 Decel to Stop
01 Coast to Stop
02 Use B03.03 Method
Parameter
Code
Name
Function
Range
Initial Value
Access
Level
C03.11
Klixon Action
Stopping Method when
Multi-Function input
H01.01–H01.07 = 56 or 57
00–01
00
Adv
00 Use B03.03 Method
01 Allow Lower Only
Содержание 2001-G+M
