![background image](http://html1.mh-extra.com/html/magnetek/2001-g-m/2001-g-m_instruction-manual_3598661161.webp)
IMPULSE•G+Mini Advanced Instruction Manual – March 2014
6-9
UL2
Upper Limit 2 Err
Upper Limit 2—STOP Indicator.
Upper
Limit 2—STOP switch status is changed.
1. May not require corrective action.
2. Check the position of the Limit Switch.
3. Check the condition of the Limit Switch.
4. Check the conditions of/for terminal H01.XX
(U01.10)
UL3
Upper Limit 3 Err
Upper Limit 3—Weighted Stop.
Upper Limit
weighted limit switch tripped.
1. May not require corrective action.
2. Check the position of the Limit Switch.
3. Check the condition of the Limit Switch.
4. Check the conditions of/for terminal H01.XX
(U01.10)
UT1
Undertorque Det 1
Undertorque Detection 1.
The current is less
than L06.02 for more than L06.03
.
1. Check settings.
2. Check motor coupling.
UT2
Undertorque Det 2
Undertorque Detection 2.
The current is less
than L06.05 for more than L06.06
.
1. Check settings.
2. Check motor coupling.
UV
(Flashing)
DC Bus Undervolt
Undervoltage Fault.
Undervoltage status
occurs for more than 2 sec during STOP. Input
voltage drops below 190V DC or less for 230V
AC class, 380V DC or less for 460V AC class.
1. Check the power source wiring.
2. Replace any bad branch fuses.
3. Check collector system.
UV1
DC Bus Undervolt
Undervoltage 1 Fault.
Undervoltage status
occurs for more than 2 sec during RUN
command. Input voltage drops below 190V DC
or less for 230V AC class, 380V DC or less for
460V AC class.
1. Check power supply wiring.
2. Correct the line voltage.
3. Check collector system.
UV2
CTL PS Undervolt
Undervoltage 2 Fault.
The inverter detected a
loss of the 24V logic power supply voltage.
1. Check power supply wiring.
2. Correct the line voltage.
3. Check collector system.
UV3
MC Answerback
MC Fault.
The pre-charge contactor opened
during operation.
1. Check power supply wiring.
2. Correct the line voltage.
3. Check collector system.
4. Wait 30-45 seconds before restarting drive
after auto shut down.
Fault Code
Fault or Indicator Name/Description
Corrective Action
Содержание 2001-G+M
