![background image](http://html.mh-extra.com/html/macdon/m155-2022/m155-2022_operators-manual_685745331.webp)
215676
311
Revision A
Chapter 5:
Maintenance and Servicing
This chapter contains the information necessary to perform routine maintenance and occasional servicing tasks on the
windrower. The word
“
maintenance
”
refers to scheduled tasks that help the windrower operate safely and effectively;
“
service
”
refers to tasks that must be performed when a part needs to be repaired or replaced. For advanced service
procedures, contact your Dealer.
5.1
Maintenance Schedule/Record
The maintenance schedule specifies the recommended periodic maintenance procedures and service intervals. Regular
maintenance is the best insurance against early wear and untimely breakdowns. Follow this schedule to maximize the
service life of the windrower.
Record the windrower
’
s serial number here for future copies of this record:
Windrower Serial Number: ___________________
Combine this record with the record in the header operator
’
s manual. Make copies of this page to continue the record.
For detailed instructions, refer to the various procedures in this chapter. Use the fluids and lubricants specified in
Recommended Fuel, Fluids, and Lubricants, page 476
.
Service intervals:
The recommended service intervals are specified in terms of the windrower
’
s hours of operation or as a
period of elapsed time; service the windrower at whichever interval occurs first.
IMPORTANT:
The recommended intervals are based on typical operating conditions. Service the machine more often if it is being
operated under adverse conditions (for example: severe dust, or handling extra-heavy loads).
CAUTION
Carefully follow all of the safety messages provided in .
!
Hour meter reading
!
Service date
!
Serviced by
First use
Preseason or Annual. For instructions, refer to
4.3.3 Preseason Checks / Annual Service,
.
Action
ü
Check
S
Lubricate
p
Change
®
Clean
First Hour
30
ü
Check drive wheel nuts torque. For instructions,
refer to
Tightening Drive Wheel Nuts, page 431
.
First 5 Hours
ü
Check A/C compressor belt tension. For
instructions, refer to
.
ü
Check caster wheel nuts torque. For instructions,
refer to
Tightening Caster Wheel Hardware,
ü
Check caster wheel anti-shimmy dampener bolts
torque. For instructions, refer to
Caster Wheel Anti-Shimmy Dampeners, page
443
30. Begins from the first use of the machine.
Содержание M155 2022
