MacDon M155 2022, Руководство оператора

Страница: 201 / 526

215676
181
Revision A
1000711
A
Figure 4.42: Lift Arms
10. Remove pins (A) from the lower end of the lift linkages.
NOTE:
Pins (A) are also used to secure the weight box to the
windrower linkage.
11. Release the safety props on the header lift cylinders. For
instructions, refer to 4.4.1 Engaging and Disengaging
Header Safety Props, page 192 .
12. Start the engine.
13. Lower the header until the weight is resting on the
transport wheels.
1007609
A
B
Figure 4.43: Ground Speed Lever (GSL)
A - Header Tilt Down B - Header Tilt Up
14. Use the HEADER TILT switches to release the load on the
center-link, if necessary.
15. Shut down the engine and remove the key from the
ignition.
Disconnect the center-link:
1000720
A
B
Figure 4.44: Hydraulic Link
16. If the windrower is equipped with a hydraulic center-link,
disconnect the center-link:
a. Pull up on latch (A), and position the latch into
notch (B) on the top of the hook.
b. Release the safety props on the header
’
s lift cylinders.
For instructions, refer to 4.4.1 Engaging and
Disengaging Header Safety Props, page 192 .
c. Disengage the top-link from the header. If necessary,
use the HEADER TILT switch to release load on the
cylinder.
17. To unlock the center-link, pull up on latch (A) and position
the latch into notch (B) on the top of the hook.
OPERATION