![background image](http://html.mh-extra.com/html/macdon/m155-2022/m155-2022_operators-manual_685745138.webp)
215676
118
Revision A
1009235
CXXX
MXXX
DISK SPEED
ENABLED/LOCKED
D
C
B
A
Figure 3.136: Disc Speed Control Lock
6.
Press SELECT (D) until DISK SPEED appears on the
upper line.
•
ENABLED/LOCKED will appear on the lower line.
7.
Press left arrow (B) to enable the DISK SPEED control
switch, or press right arrow (C) to lock the DISK SPEED
control switch.
8.
Press PROGRAM (A) to exit programming mode or press
SELECT (D) to proceed to the next WINDROWER SETUP
option.
Activating Reel Speed Control Lockout
Activating the reel speed control lockout in the windrower
’
s cab display module (CDM) prevents unauthorized Operators
from changing the reel speed of the attached rotary header.
NOTE:
This procedure applies to windrowers with attached draper headers only.
NOTE:
The header
MUST
be attached to the windrower to perform this procedure. The cab display module (CDM) automatically
adjusts its programming for each header. For more information, refer to
4.5 Attaching and Detaching Headers, page 215
.
1009066
CXXX
MXXX
WINDROWER SETUP?
NO/YES
A
B
C
Figure 3.137: CDM Programming Buttons
1.
Turn the ignition key to the RUN position, or start the
engine.
2.
Press PROGRAM (A) and SELECT (C) simultaneously on the
CDM to enter programming mode.
•
WINDROWER SETUP? will appear on the upper line.
•
NO/YES will appear on the lower line.
3.
Press right arrow (B) to select YES. Press SELECT (C).
•
SET KNIFE SPEED? will appear on the upper line.
Содержание M155 2022
