![background image](http://html.mh-extra.com/html/macdon/m155-2022/m155-2022_operators-manual_685745322.webp)
215676
302
Revision A
5.
Press DISPLAY SELECTOR switch (E) on the ground speed lever (GSL) or press FAST button (C) or SLOW button (D) on
the cab display module (CDM) until the message ##.# AUGER SPEED appears at location (A). The displayed value
represents the speed of the auger.
NOTE:
Changes to the reel speed will directly affect the speed of the auger. However, when the reel speed is adjusted, the auger
speed value displayed on the CDM will not change.
6.
Press FAST button (C) or SLOW button (D) on the CDM until the desired auger speed is achieved.
4.7.2
Reel Speed
The ability to control or monitor the header
’
s reel speed differs depending on the particular model of auger header
attached to the windrower.
Reel Speed
–
A30D Auger Headers
On A30D Auger Headers, the reel is driven by the auger, which means that both the reel speed and the auger speed are
dependent on the main header drive speed. The auger and reel speeds can only be changed by installing a different size
auger drive sprocket, or by varying the windrower engine rpm. A30D Auger Headers are not equipped with a reel speed
sensor; therefore no reel or auger speed information is displayed on the cab display module (CDM).
Reel Speed
–
A40D Auger Headers
The A40D Auger Header features a hydraulic direct drive reel with an operating speed range of 15
–
85 rpm. The Operator
can control the reel speed using the cab display module (CDM) and the ground speed lever (GSL).
The reel drive motor and the auger drive motor are connected in series but a separate line to the auger allows the reel
speed to change independently from the auger speed. Switches on the GSL are used to adjust the reel speed which is
displayed on the CDM display. The reel speed can be set by three methods:
•
Reel Only (only reel speed changes)
•
Reel On-the-Go (reel and auger speeds change)
•
Reel to Ground (indexed)
NOTE:
Adjusting the reel speed will result in a change to the auger speed unless the auger speed has been preset.
Содержание M155 2022
