M2M Easy 2, Руководство по установке

Страница: 81 / 88

81
Zone:
 SMS – 0x10
 TCP – 0x20
 Serial – 0x30
(3) Login to Programming mode (for dispatcher centre)
Parameter Description
- In the
Easyterm
in case of password authentication after login, the
following event generates, when the
Easyterm
sends the LOGIN
command to the device. The CID code generates with the zone
value, which shows the interface where the login were attempted.
CID code: E627
Partition: 99
Zone:

TCP – 0x20
 Serial – 0x30
(4) Logout from Programming mode (for dispatcher centre)
Parameter Description
- In the
Easyterm
in case of
the
LOGOFF command will be sent
before the EXIT or EXITCFG commands, the
it
generates a CID
code. There, the zone value shows the interface where the logout
from the programming mode were attempted.
CID code: E628
Partition: 99
Zone:
 TCP – 0x20
 Serial – 0x30