51
The
LFFREQ
is the life signal sending frequency on GPRS channel, which is setup to 300
seconds by general. Check that it is fine or not. The
LFUNIT
value is the amount for the
LFFREQ
in seconds or minutes.
By
disabling
the
LFPRES
value you can send hidden life signals (P603) to the dispatcher
center/IP-receiver (if it is supported). By
enabling
it, the normal GPS value will be sended.
If you’ve changed one of the listed parameter values, then the program will highlight the
changed value lines by
bold
. For sending the listed parameter values for the device
(regarding the
Selected
coloumn)
–
check the proper selection
–
push the
Write config
button at the bottom of the screen. The program will indicates the configuration progress by
the progress bar at the bottom of the screen and at the
Terminal window
(3). At the end
of the parameter sending, the device is restarting by using the new settings.
Then, let’s opent the
GPRS Service
parameter group at the
Device Type
for the
APN
settings
. Then the program will load the related parameters.
