59
The listed input parameters starting by the
character „I”
are value for the input numbers
from #3 to #8 - according the requirements.
The listed output parameters starting by the
character „O”
are value for the output
numbers from #2 to #4.
The ’
x
’ assigns the number of the current input/output line.
If you’ve changed one of the listed parameter values, then the program will highlight the
changed value lines by
bold
. For sending the listed parameter values for the device
(regarding the
Selected
coloumn)
–
check the proper selection
–
push the
Write config
button at the bottom of the screen. At the end of the parameter sending, the device is
restarting by using the new settings.
Standalone alam system settings
For the
configuration of the standalone alarm system arming/disarming operation
open the
Other
parameter
group at the
Device Type
. Then the program will load the related
parameters.
You can
enable
the
ARMSMS
parameter, which notifies about the remote
arm/disarm
events.