35
Then you can check the current status of the gate opening at the
OUT
title. You also can control it
by the
ON
/
OFF
buttons.
Furthermore, the stored phone numbers (recorded Customers in the contact list) can remotely
control
–
open/close - the
Easy2
through SMS messages, ringing.
4.12 Disabling zones (Bypass mode)
At the right top side of the screen you will found the
Bypass
tab. When opening, you can drop-
down a list and choose the
Easy 2 inputs
item. Regarding the choice, the program reads
out the input information of the related zones, parameters, life signals. The reading process
is assigned by the progress bar.
Here you can check the status (
State
), and the input settings (as Type,
H->L
(High-to-Low)
and
L->H
(Low-to-High),
Arm
type
EOL
, and the armed/disarmed or disabled zone statuses
(
IxBypass
)).
Furthermore, you can disable all zones for the inputs by the
Bypass on
button or you can
enable them by the
Bypass off.
Then
disabling turns on the alarming for all listed inputs.
In case of disabled zones, the zone events will not alarmed and signalled further as alarms,
the device will forward the zone events as normal events.
You can define the zone bypass for each inputs, as the
I1Bypass
is valid for the input #1,
the
I2Bypass
for the nr. #2, and so on. There you can also control the bypass with the
ON
