75
7.2 Query commands
You can send several query commands in the same SMS text message, but cannot mixed
with further value-addiotional commands!
You will receive a response SMS text notification with the queried values for answering the
sent SMS command message.
Command
Response content
INFDEV
or
DEVSTAT
It will response a SMS report with the current statuses of the
Easy 2
:
account nr. (customer ID), signal strength, software version,
hardware identifier, device IMEI identifier, SIM card ICC identifier,
battery status, IP address
Containing parameter values:
ACCOUNT, SQ, SWVER, HWID,
IMEI, SIMICC, VBATT, IP
INFIO
Current status of the input lines and the output line.
Containing parameters:
ACCOUNT, SQ, current status of the
inputs lines & the output line
INFTEL
Configured voice/SMS notification settings, phone numbers and
notification (SMS text message) order sequence, voice call (ringing)
order sequence will be responsed.
Containing parameters:
ACCOUNT, SQ, TEL1, TEL2, TEL3, TEL4,
I1S, I2S, I1V, I2V
INFSMS
Input SMS notification settings.
Containing parameters:
ACCOUNT, SQ, I1ON, I1OFF, I2ON,
I2OFF
INFIP
Server connection settings.
Containing parameters:
ACCOUNT, SQ, IMEI, IP, SERVER1,
PORT1, SWPROTO
7.3 Parametrizing by commands
Hereby we collected all SMS command parameters which are NOT handled by the
EasyTerm
software.
For sure, you can use all further listed commands (exact
EasyTerm
parameter names and
value).
You always have to use password authentication, in every parametring SMS command
message! The last command in every SMS command message must be the
RESET
command
which performs a device restart after the succesful configuration of the new, required
settings!
