50
In case of necessary you can save the configuration to your computer by the
Save file
button. Please, also check the Chapter 5.6
5.4 Standalone Alarm System mode settings
In this operation mode the
Easy 2
is operating as a standalone alarm system, when it is
transmitting to a remite IP address or to the dispatching software - through GPRS. The
further settings are recommended to check or modify in case of necessary.
Load the factory default .CFG file by the
Browse
button.
GPRS communication and APN settings
For the
GPRS settings
choose the
GPRS Settings
parameter group at the
Device Type
.
Then the program will load the related parameters.
Change the
GPRSEN
value to
Enable
, to operate the device as a GPRS transmitter.
At the
SFUNCT
parameter you can define thath the primary or secondary server IP address
will be the first in the signalling sequence.
The
BACKUP
parameter allows a backup signalling to the centre through GSM - in case of
mobile network fall/outage. The GSM-relevant parameters must be also configured
–
e.g.
SYS1
.
You can modify the
ACCOUNT
parameter value if you are attempted to signalling an own
customer ID for the identification. If it is not used, the BCDE code will be signalled.