background image

Safety

6

© Lutz-Jesco GmbH 2020

BA-42840-02-V03

Water sampling station

 EASYPRO COMPACT

Operating instructions

2.4.2  Trained electricians

Due to their professional training, knowledge and experience as well as 
knowledge of specific standards and provisions, trained electricians are 
able to do the electrical work assigned to them and to recognise and 
avoid any potential dangers by themselves.

They are specially trained for their specific working environment and are 
familiar with relevant standards and provisions.

They must comply with the legally binding regulations on accident 
prevention.

2.4.3  Trained persons

Trained persons have received training from the operator about the tasks 
they are to perform and about the dangers stemming from improper 
behaviour.

Trained persons have attended all trainings offered by the operator.

2.4.4  Personnel tasks

In the table below you can check what qualifications are the pre-condi-
tion for the respective tasks. Only people with appropriate qualifications 
are allowed to perform these tasks!

Qualification

Activities

Specialist staff

Installing the hydraulics

Commissioning

Shut-down

Fault resolution

Maintenance

Disposal

Trained electricians

Installing the electrics

Rectifying electrical faults

Trained persons

Operation

Storage

Transportation

Tab. 3:  Personnel tasks

Содержание EASYPRO COMPACT





























































Отзывы: