Lutz-Jesco EASYPRO COMPACT, Руководство по эксплуатации

Страница: 48 / 60

Modbus addresses
48
© Lutz-Jesco GmbH 2020 BA-42840-02-V03
Water sampling station
EASYPRO COMPACT
Operating instructions
Address
Read Write
Description Meaning
2104 x The assigned input of the controller
n
0 = Sensor 1
n
1 = Sensor 2
n
2 = Sensor 3
n
3 = Sensor 4
n
4 = Virtual input 1
n
5 = Virtual input 2
n
6 = Virtual input 3
n
7 = Virtual input 4
n
8 = Timer switch
2105
x Control output Y (active control) 500 = 50,0 % (2 Byte signed int)
x x Control output Y (only manual mode)
2106
x Control output 2 Y2 (active control) 500 = 50,0 % (2 Byte signed int)
Second side if 2-side control is active.
x x Control output 2 Y2 (only manual mode)
2107 – 2108 x x Setpoint 1 Number of positions after the decimal point, see unit (4 bytes signed
int.).
2109 – 2110 x x Setpoint 2 If 2-side control is active (4 byte signed int).
2111 x x Xp Number of positions after the decimal point, see unit (2 bytes unsigned
int.).
2112 x x D Derivative time in s (2 byte unsigned int).
2113 x x I Reset time in s (2 byte unsigned int).
2114 x x Minimum and maximum alarm
Write:
0 = clear alarm
Read:
Bit 0 = minimum alarm is active
Bit 1 = maximum alarm is active
2115 x x Y alarm
Write:
0 = clear alarm
Read:
Bit 0 = Y alarm is inactive
Bit 1 = Y alarm is active
2116 x x Manual mode
Bit 0: Manual mode on
Bit 1: Lower (with 2-side control)
Further non channel-related data.
2220 – 2223 x Analogue outputs 1 – 4 421 = 4.21 mA (2 byte signed int)
Tab. 32: Modbus addresses