Notes to EU conformity
51
© Lutz-Jesco GmbH 2020
Subject to technical changes.
200116
BA-42840-02-V03
Water sampling station
EASYPRO COMPACT
Operating instructions
14 Notes to EU conformity
The
EASYPRO COMPACT
water sampling station does not fall under the
purview of the Machinery directive 2006/42/EG.
The
EASYPRO COMPACT
water sampling station falls under the purview
of the pressure equipment directive 2014/68/EU.
The values stated below do not exceed the limit values according to
article 4, paragraph 1. As such, the
EASYPRO COMPACT
water sampling
station is designed and manufactured in accordance with valid good
engineering practice. In accordance with article 4 section 3, as a pressure
device, the
EASYPRO COMPACT
does not carry CE marking and cannot
be issued with a EU declaration of conformity.
Device designation: Water sampling station
Type:
EASYPRO COMPACT
Pressure stage:
PN6
Nominal diameter:
<DN20
Max. temperature:
45 °C
Medium:
Water
(H
2
O)
The
EASYPRO COMPACT
water sampling station corresponds to the
requirements of the Pressure equipment directive 2014/68/EU.
The electronic controller installed on the
EASYPRO COMPACT
water
sampling station is fitted with a CE mark and holds a EU declaration of
conformity.
The manufacturer and distributor of the
EASYPRO COMPACT
water
sampling station is:
Lutz-Jesco GmbH / Am Bostelberge 19 / 30900 Wedemark / Germany
