Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 94 / 130

94
7.
You can test the signal strength at the intended place of installation. For that
purpose, go to the intended place of installation, press Range test
 Start in the
control unit menu Sensors  Range and then press the Test button of the glass
breakage sensor. The higher the indicated number the better the reception (1-9).
Note:

The sensor list lists the glass breakage detector as door contact.

You can mount the detector to the ceiling or the wall.

The glass breakage detector detects sounds and sound shock waves in a 360°
radius.

Make sure that no obstacles are between the window and the glass breakage
detector.

Install the glass breakage detector in open spaces (not in corners), so that the
sound waves can reach the sensor from as many sides as possible.

Do not install the glass breakage detector close to other electric appliances.

Set jumper 2 (JP2) to OFF to activate the supervisor function (battery check).