Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 42 / 130

42
Communication
Sensors
Group 400: Open / Close / Remote
Open / Close
Remote access
Access control
Group 500: Bypass / Deactivations
System
Relay
System perimeter
Communication
Special codes
Use the “Special codes” menu of the LUPUSEC-XT1 to enter the “Silent alarm code”
and the “Installer code” as well as the “Temporary code” via the keypad.
Silent alarm code: If you are forced to enter the code, you can enter the silent alarm
code instead of the standard PIN code. This will stop the audio alarm – if active – and
still transmit alarm messages through all channels. That means: all alert methods (e-
mail, text message, or contact ID) remain or are active.
Installer code: Is intended for the system installer. If you enter the code, the alarm
system is disarmed in the usual way, but the use of this code is reported.
Temporary code: This code is valid only once and disarms the alarm system. Tick
the “Notification” option, if you want to be notified in case the code is used.