Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 32 / 130

32
In the “Bypass” menu, you can deactivate the sensors
only for the next arming of
the alarm system. They are then not able anymore to trigger an alarm, irrespective of
the LUPUSEC-XT1 mode. Sensors, which cannot trigger an alarm, e.g. sirens, do
therefore not react to the bypass function.
The table shows all sensor types, zone numbers, and sensor names and whether a
bypass of the sensor is already active. To deactivate a sensor
once , click “Bypass” in
the line of the respective sensor in the last column.
Devices
Devices / sirens
In the “Sensors”
 “Devices” menu, you can configure all external sirens or add
additional devices to the LUPUSEC-XT1. These include wireless repeaters and
wireless relays. To learn the devices, click „Add / configure“.
Activate the learn mode of the respective device. Refer to the Wireless repeater or
wireless relay menu for the functional description. The control unit confirms that the
device is recognized with a short signal tone. You can learn up to six devices to the
XT1.
Siren settings

Tamper contact
Deactivates the tamper contact of all currently connected “external” (in
addition to the control unit) sirens
for one hour (useful e.g. to change the
batteries).
To deactivate the tamper contact of the siren(s), please proceed as follows:
o
Click “Tamper contact off”
o
Then click “OK” below