Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 10 / 130

10
Put the LUPUSEC-XT1 into operation
The following pages describe the installation and start-up of the LUPUSEC-XT1
systematically. To avoid damages to the system, please observe these instructions in
detail and read the manual carefully before you start. You will find installation videos
on the XT1 product page of our website (
www.lupus-electronics.de ).
Control unit
Take the control unit out of the packaging. Check for possible transportation
damages immediately after the delivery. If you see any damage, please complain to
your local retailer promptly.
Place of installation
The place of installation is crucial for the smooth operation of the system, as all
sensors (door/window contacts, smoke detectors, glass breakage detectors, etc.) are
connected to the control unit wirelessly (868 MHz or 2.4 GHz). Therefore, choose the
place of installation to ensure the shortest airline distance between the control unit
and all sensors. A central, open place is a good choice.
Furthermore, make sure that neither metals nor strong magnetic fields interfere with
the radio communication.
Do not install the control unit in the following locations:

Basements

Close to microwaves, ovens, hobs, iron doors, or iron walls

Garages

Cupboards or drawers

Do not place any objects in front of the device.

The device is not intended for the operation in space with high temperatures or
humidity (e.g. bathrooms) or excessive dust.

Max. operating temperature and operating humidity:
-10°C to +50°C, maximum 75 % relative humidity

Operate the device in a moderate climate only.
Please note and/or ensure:

That this manual might be outdated. For the latest pdf version, go to
www.lupus-electronics.de or contact the Lupus support service.

Always to provide sufficient ventilation.

To leave a safety clearance of 10 cm on all sides.

That no direct heat sources (e.g. air conditioning/heaters) are close to the
device, which may affect the device.

That no direct sunlight hits the device.

That the device is not located close to magnetic fields (e.g. speakers).

Not to place any open fire sources (e.g. candles) on or next to the device.