Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 30 / 130

30
triggered, an event code (#111) is transmitted.

Medical emergency
A sensor with the “Medical emergency” attribute is always on alert, irrespective
of whether the alarm system is “armed”, “disarmed”, or in “Home mode”. If the
sensor is triggered, an event code (#101) is transmitted.

Water
A sensor with the “Water” attribute is always on alert, irrespective of whether
the alarm system is “armed”, “disarmed”, or in “Home mode”. If the sensor is
triggered, an event code (#154) is transmitted.

Technical alarm
If the LUPUSEC-XT1 is in armed or disarmed mode and a sensor with the
“Technical alarm” attribute is triggered (e.g. door contact or motion detector),
the control unit receives this alarm (#611). An acoustic alarm is not emitted.
Add
In the “Add” menu, you can add sensors to the LUPUSEC-XT1. Simply click “Start”
next to “Add” to start the automatic sensor search. Then, start the test of the (“Learn”)
mode of the sensor to install. Read the sensor description to find out, how to add the
sensors. Usually, the sensor is equipped with a button to be pressed for a certain
time.
If the sensor was found, it is listed in the table, which also shows the type of contact
(“Type”), the reception quality (“Signal strength”) and the unique “Sensor ID” of each
sensor.
You can add the sensor to the alarm system via the option “Add”. You can assign
properties to the added sensor, as explained in the previous section “Sensor
settings”.