Lupus Electronics LUPUSEC-XT1, Руководство пользователя

Страница: 120 / 130

120
Cable connection diagram:
Range test:
1.
Open the control unit menu  Sensors  Range and press Start.
2.
Press the Test button of the in-wall relay.
3.
The sensor and the signal strength should be indicated.
External switch:

You can use an external switch for easier handling.

The operation of the external switch is similar to the direct operation of the Test
button (activates or deactivates the relay).
Note:

The relay can be activated and deactivated manually on the website.

You can save dynamic or scheduled programming in the Automation menu.

The maximum load at 110 V is 1100 W and 10 A. Do not exceed these limits!

The maximum load at 230 V is 2300 W and 10 A. Do not exceed these limits!

After a power failure, the in-wall relay returns to the last state before the power
failure.

The in-wall relay is incompatible with the wireless repeater and cannot be saved
in the backup configuration file.

The in-wall relay is a new edition (version 2, available since the end of 2014).