Lucent Technologies PacketStar PSAX 2300 Скачать руководство пользователя страница 408

Страница: 408 / 680

Chapter 9 Configuring SNMP Authentication Options

Configuring the User-based Security Model (USM)

9-14

255-700-447

PacketStar

PSAX 2300 Multiservice Media Gateway User Guide

, Issue 1

Release 9.0.0

Deleting USM Users

To delete a USM user, perform the steps in the following procedure.

Begin

On the SNMP Agent System-Wide Configuration window, select the
USM User Configuration option.

The Usm User Table window is displayed.

On the Usm User Table window, select the USM user name for the user
to be deleted.

The Usm User Key Change Configuration window is displayed.

Review the record and make sure it’s the one you want to delete.

Select the Delete this User and Return command.

The USM user is deleted and the Usm User Table window is redisplayed.

End

Key Type

Default: Authenti-
cation

Range: N/A

Format: Predefined

Indicates the key type password to be changed.

Authentication

Indicates that the authentication password is to
be changed.

Privacy

Indicates that the privacy password is to be
changed.

Original Password

Default: N/A
Range: 1–32 charac-
ters

Format: ASCII char-
acters 33–126

Specifies the original password. See the reference
appendix for a list of permitted ASCII characters.

New Password

Default: N/A

Range: 1–32 charac-
ters

Format: ASCII char-
acters 33–126

Specifies the new password. The text string is
case-sensitive. The use of the space character is
not supported.

Table 9-12. Field Descriptions for the Usm User Key Change Configuration Window (Continued)

Field Name

Field Values

Description

Содержание PacketStar PSAX 2300







































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание PacketStar PSAX 2300

Отзывы:

Lucent Technologies PacketStar PSAX 2300, Руководство пользователя, Страница: 408 / 680

Результаты поиска

Содержание PacketStar PSAX 2300

Отзывы: