Lucent Technologies PacketStar PSAX 2300, Руководство пользователя

Страница: 387 / 680

255-700-447 8-49
PacketStar
®
PSAX 2300 Multiservice Media Gateway User Guide
, Issue 1 Release 9.0.0
Chapter 8 Configuring V5.2 European IDLC
User Side Configuration Summary
Accessing the V5 User Port Configuration Window, PSTN Port Type
Begin
Note: If you are configuring Port type PSTN on the V5 User Port Configu-
ration window, the fields that display for configuration are differ-
ent from those that display for ISDN. Complete this procedure if
you are using a Port Type PSTN. If you are configuring Port Type
ISDN, complete the “Accessing the V5 User Port Configuration
Window, ISDN Port Type” on page 8-55 procedure following the
PSTN port type procedure.
1 From the V5 User Port Table, select the Add User Port Configuration
Entry command. The V5 User Port Configuration Window displays (see
Figure 8-19). Table 8-35 describes the commands and Table 8-36
describes the fields on this window.
2 At a minimum, enter values for the fields listed below.
• LE Port ID
•
Port Type
• Vcc Id
•
Rem IWF Id
• LES Interface Port ID
•
Encode Standard
• Encoding profile Num
•
VC algorithm
• Tone Detection Algo
•
Translate Type
3
If you want to add ports, change the Admin Status field to Unblocked
and select the Add V5 User Port Configuration command.
End
Add User Port configuration
Entry Adds the User Port configuration values of
a specific entry.
Go back to Previous Screen Returns to the V5 Interface Variant Con-
figuration window.
Table 8-34. Commands for the V5 User Port Table Window (Continued)
Command Function