Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Страница: 1032 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Special Characters
H-2 Analog Multiline Telephones
H
Analog Multiline Telephones
4
Some dialing sequences need special characters. For example, the user presses
Hold to insert a Pause character after the dial-out code in a dialing sequence to
allow the system to seize an outside line before dialing the number. A Pause
character can also be used to separate a telephone number from an extension
number.
Table H-2. Special Characters for Analog Multiline Telephones
Press... See
1
...
1 Display telephones only.
Means...
Drop
2
s
Stop. Inserts a Stop within a sequence of
automatically dialed numbers. For example, an
outside Auto Dial button may be programmed with a
password, then a Stop, then a telephone number. To
use Auto Dial with a Stop in the sequence, the user
presses the button to dial the password, listens for
the dialing and connection, and presses the button
again to dial the number.
Hold
p
Pause. Inserts a 1.5-second pause in the dialing
sequence. Multiple consecutive pauses are allowed.
Conference
2
2 Not available on MLC-5, MDC 9000, and MDW 9000 cordless and cordless/wireless telephones.
f
Flash. Sends a switchhook flash. Must be the first
entry in the dialing sequence.
##
#
End of Dialing for Auto Dial buttons. Used at the
end of a dialing sequence to indicate that the user
has finished dialing or to separate one group of
dialed digits from another.
#
#
End of Dialing. Used at the end of a dialing
sequence to indicate that the user has finished
dialing or to separate one group of dialed digits from
another.