Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Страница: 390 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-188 PRI Facilities
3
Console Display/Instructions Additional Information PC
4. Enter the slot number in the control unit (
ss
=
1
to
17
).
5. Save your entry.
Select
Enter.
6. Specify the switch type.
7. Save your entry.
Select
Enter.
8. Return to the System Programming menu.
Select
Exit
twice.
Telephone Number
3
Use this procedure to assign a string of up to 12 digits to each PRI channel. This
string must match the number sent by the network (that is, the number provided
by the PRI service provider) to indicate the number dialed by an outside caller.
The system uses this number to route the call to the correct destination, which
means that the number assigned to each channel in the same B-channel group
must be unique. Note also that the number cannot be the same as the associated
test telephone number.
PRI Slot Number:
Enter slot number (1–17):
Backspace
Dial or type:
Ã
Exit Enter Slot number
[ss].
Slot xx PRI Switch Type:
Select one
4ESS DEX600E
5ESS Legend-Ntwk
DMS-250 Legend-PBX
DMS-100 Press the button or function key next to
Ã
Exit
your selection.