Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Страница: 247 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-45 System Operator Positions
3
Console Display/Instructions Additional Information PC
3. Select
Queued Call
(QCC).
4. Specify the QCC extension as a QCC position.
5. Assign or remove the QCC operator extension.
Select
Enter
or
Delete.
You may continue to assign or remove
QCC operator positions by repeating
Steps 4 and 5.
6. Indicate that you have finished entering all positions.
Select
Store All.
The session is terminated and the
system restarts. You must enter system
programming again to continue.
System Operator: If you get the System Busy message,
Make a selection wait for an idle condition or exit
Direct Line
system programming and try again later.
Queued Call
Exit
QCC Operator Positions:
If no DSS is attached:
Enter extension SP: “Entering an Extension”
Ã
If DSS is attached:
Toggle the red LED on or
Store All Delete off as required. Go to Step 6.
Backspace
On = extension is currently assigned
Exit Enter Off = extension cannot be assigned
as a QCC
Flashing = extension can be assigned
as a QCC