Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию, Страница: 591 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-389 QCC Optional Features
3
Console/Display Instructions Additional Information PC
2. Enter the group coverage number (
nn
=
1
to
30
).
3. Save your entry.
Select
Enter.
4. Specify the operator position.
5. Assign or remove the operator from Group Coverage calls.
Select
Enter
or
Delete.
You may continue to assign or remove
QCC operators from Group Coverage
calls by repeating Steps 4 and 5.
6. Assign operators to the receive
calls from the next Group Coverage
number or go to Step 7.
Select
Next.
Return to Step 4. The next Group
Coverage number displays on Line 1.
Group Coverage Calls:
Enter grp coverage
number (1–30)
Backspace
Exit Enter Dial or type
[nn].
Ã
Operator GrpCoverage xx :
xx
= number entered in Step 6
Enter QCC operator
extension number If no DSS is attached:
SP: “Entering an Extension”
Ã
Delete If DSS is attached:
Backspace Next Toggle the red LED on or
Exit Enter
off as required. Go to Step 6.
On = operator receives Group Coverage
calls
Off = extension is not an operator position
Flashing = operator does not receive
Group Coverage calls