Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Страница: 267 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-65 Lines and Trunks
3
Console Display/Instructions Additional Information PC
3. Select
Loop-Start Disconnect.
4. Specify the disconnect signal as reliable or unreliable.
5. Save your entry.
Select
Enter.
6. Return to the System Programming menu.
Select
Exit
twice.
Toll Type
3
Use this procedure to specify whether users have to dial a toll prefix (
1
or
0
)
before dialing an area code and telephone number. (Your local telephone
company should verify toll prefix requirements for each line/trunk.)
This setting is used by the system to classify calls as local or long distance, so
that appropriate toll restrictions can be applied.
NOTE:
This option applies only to loop- and ground-start trunks; it does not apply
to tie trunks or DID trunks.
TouchTone/LS Disconnect:
Make a selection
Outmode
LS Disconnect
Exit
LS Reliable Disconnect:
Select one
Yes
No
Select
Yes
Exit Enter
or
No.