Lucent Technologies MERLIN LEGEND Release 7.0, Руководство по системному программированию

Страница: 425 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-223 PRI Facilities
3
Console Display/Instructions Additional Information PC
7. Erase the current identification number (
nn
).
8. Enter the new identification number (
n
=
0
to
63
).
Dial or type
[nn].
9. Continue to assign the identification number to another slot or go to Step 10.
Select
Next.
Return to Step 7. The next slot is
displayed on Line 1.
10. Save your entry.
Select
Enter.
11. Return to the System Programming menu.
Select
Exit
three times.
Dial Plan Routing 3
Dial plan routing provides a way to route incoming calls on a “per B-channel
group” basis. An incoming call is routed by matching the incoming number (by
service, number of digits, and pattern) and then optionally deleting and/or adding
digits to direct the call to a specific endpoint. A service must be specified; the
number of digits and pattern are optional. For example, you can specify that calls
received from a particular area code should be routed to the specific individual or
group responsible for accounts in that area.
Dial plan routing is available in Hybrid/PBX mode only. Key systems route
incoming calls on a per-line basis.
Slot xx TEI:
xx
= number entered in Step 5
Enter terminal equipment
id number (0–63)
nn
Backspace Next
Exit Enter Press Drop.
7%
+
I