Lucent Technologies IP-GE/2, Руководство по установке

Страница: 37 / 212

............................................................................................................................................................
6
Install the nut retainers according to the configuration of access and
rack type, see “Subrack Measurement” (1-14).
Reference:
The subracks can be mounted as follows:
•
within 300mm rack frames only at the front side.
•
within 600mm rack frames at both front or/and rear side
(called: back-to-back )
..........................................................................................................................................................
7
Slide the subrack into
the rack frame and
mount the subrack
according to its
configuration position
for ..... at .....
300mm rack frames the front.
600mm rack frames the front for front mounting or/and at
the rear for rear mounting positions.
............................................................................................................................................................
8
Place the “Units and Interface Paddle-Boards” (2-10) in the right
configuration positions according to the configuration.
............................................................................................................................................................
9
Feed the fiber cables through the cable ducts and connect the cables
according to the configuration.
•
“Optical Interfaces” (5-52)
•
“Gigabit-Ethernet Interfaces” (5-55)
............................................................................................................................................................
10
“Mounting of the Optical Patch Panel/Cables” (2-14)and route the
“Optical Patch Panel” (5-56) connections
............................................................................................................................................................
11
Install the internal/external interconnection cables.
•
“DC Power and Grounding” (5-6)
•
“Bay-Top Alarms” (5-13)
•
Clock interfaces:
- “Coaxial 75
Ω
Clock Interface” (5-7)
- “Symmetrial 120
Ω
Clock Interface” (5-10)
•
“Miscellaneous Discrete Interface” (5-14)
•
“Office-Alarm Interface” (5-18)
Mounting of the Subrack Installation
....................................................................................................................................................................................................................................
365-312-761
Issue 1, May 2004 Lucent Technologies - Proprietary
See notice on first page
2 - 3