Handling Precautions
....................................................................................................................................................................................................................................
Precautions
Special handling precautions must be applied whenever installing or
removing parts of the equipment. These precautions include:
•
Leave components or equipment in their original packaging until
they are required for use.
•
Remove plug-in units with previously discharged hands (e.g. by
using grounded wrist-straps that are connected to the ESD
Bounding Point on the product).
•
Return items for repair in suitable anti-static packaging.
Condensation
WARNING
TO AVOID CONDENSATION
When equipment is brought suddenly from a cold to a hot
place this may cause condensation, which may damage the
equipment and will accelerate corrosion.
To prevent condensation, the equipment should be kept either
in its original packaging or put in a closed ESD plastic bag
before entering the hot place.
Then wait until the equipment has reached the ambient
temperature before removing the packaging.
The waiting time may vary from situation to situation, but
generally a waiting time of 8 hours should be sufficient.
General information
....................................................................................................................................................................................................................................
1 - 2
Lucent Technologies - Proprietary
See notice on first page
365-312-761
Issue 1, May 2004
