LSIS XDL-L7NH Series, Руководство пользователя, Страница: 339 / 348

13. Appendix
13-23
(7-segments display a message when Flash deletion is complete while downloading the firmware using
the FoE)
*Caution
The following error occurs if you try to download before the required 10 seconds pass for the
flash memory to be cleared. Two error windows shown below may indicate that the flash
memory is not deleted completely, or the file name does not match. Check the file name, wait
for 10 seconds until the flash memory is cleared, and then try it again.
(4)
Click Download in the File Access over EtherCAT menu at the bottom of the Online tab.
(5)
Select the path of the file to be downloaded (L7NH_FW.efw or L7NH_FW.bin) and the file. If the
file name does not match, download will not start and the following error will occur:
(6)
Enter the password for file download and click OK to start the download. (Password: 00000000)
(7)
If "Downloading..." is displayed as shown in the following figure, the download is in progress. If the
progress bar at the bottom is full, it indicates the download is completed. After completing the
download, be sure to click Init in the State Machine menu to switch it to the Init status.