LSIS XDL-L7NH Series, Руководство пользователя, Страница: 192 / 348

9. Object Dictionary
9-20
This specifies the checking interval for main power phase loss. This function detects instantaneous
voltage drop or voltage sag, which may occur depending on the condition of external power input, to
check the main power phase loss. Set this function properly according to the condition of external
power input.
0x2008 7SEG Display Selection ALL
Variable
type
Setting range
Initial
value
Unit Accessibility
PDO
assignment
Change
attribute
Storage
UINT 0 to 100 0 - RW Yes Always Yes
This specifies items to display in the 7SEG window.
Setting
values Displayed item Unit
Description
0
Operation status -
1
Speed feedback rpm, mm/s
2
Speed command rpm, mm/s
3
Torque feedback 0.1%
4
Torque command 0.1%
5
Accumulated Operation
Overload
0.1%
6
DC link voltage V
7
Accumulated
Regeneration Overload
0.1%
8
Mechanical angle 0.1deg
9
Electrical angle 0.1deg
10
Inertia ratio %
11
Drive temperature 1 °C Temperature near the drive power
element
12
Drive Temperature 2 °C
Internal temperature of drive
13
Encoder temperature 1 °C
Internal temperature of encoder
14
Node ID -
0x2009 Regeneration Brake Resistor Configuration ALL
Variable
type
Setting range
Initial
value
Unit Accessibility
PDO
assignment
Change
attribute
Stora
ge
UINT 0 to 1 0 - RW No Always Yes
Perform regenerative resistance-related setting.
Setting
values
Description
0 Use the regenerative resistance installed in the drive.
1
Uses regenerative resistor separately installed outside the drive.
Ensure that the value (0x200B) and capacity (0x200C) of the regenerative resistor
are set correctly. For the wiring of the external regenerative resistor, refer to the
wiring diagram of the power supply (2.3).