LS tractor XP8084 Скачать руководство пользователя страница 28

Страница: 28 / 288

1 - 16



Level of protection of the OPS (Operators Protection Structure) :

This tractor does

NOT

provide protection against

- falling objects, such as branches, logs or tree limbs, low hanging wires in the forest, orchard or

construction area.

- toppling trees, primarily in case a rear-mounted tree grab-crane is mounted at the rear of the

tractor.

- penetrating objects in the operator’s enclosure, primarily in case a winch is mounted at the rear of

the tractor.

- steep slope or rough terrain working conditions.

- potential risks by using any optional equipment that might be available to deal with those hazards.

Your tractor is NOT EQUIPPED FOR FORESTRY APPLICATIONS.

NEVER enter or operate

these hazardous area without certified Operator Protective Structure installed.

Содержание XP8084

































































































































































































































































































Результаты поиска

Содержание XP8084

Отзывы:

Похожие инструкции для XP8084

Бренды по названию

Популярные бренды

LS tractor XP8084, Руководство оператора

Результаты поиска

Содержание XP8084

Отзывы:

Похожие инструкции для XP8084

Бренды по названию

Популярные бренды