1 - 18
Connect left and right brake pedal(s) while
driving on the road. (if fitted)
DO NOT use differential lock device while
driving on the road or turning in the field.
DO NOT ride your foot on the brake pedal(s) or
clutch pedal.
Do not jump up/down while tractor is moving.
When getting on/off the tractor, use the grab rail
and sub step to prevent falls.
(3) Notices while operating/using the tractor
Ventilation
Warning
▶
It is very dangerous to work in
a closed area. The poisonous
exhaust gas may cause serious
damage to the human body. If
you should work in this area,
make sure to ventilate well and
put on the protective mask.
When driving the tractor in reverse, lower the
engine speed. Make sure to check if there is any
obstacle or person in the rear.
DO NOT permit other people and especially
children approach within working area while
operating tractor and equipment.
Noise and Vibration
: When working between buildings or in confined spaces, the sound pressure
level can be increased. Wear suitable ear protectors in high noise level conditions. When working
with equipment in the field, vibration intensity from equipment may be increased. To reduce the
harm to the body, take a rest periodically.
Lower the driving speed enough before turning a
sharp curve. Especially, when you drive the
tractor with implements, make the turning radius
wider.
DO NOT start or stop the tractor suddenly.
Engage the clutch and brake softly. If not, front
wheels can be lifted up and it is very dangerous.
While working, you must clean the spraying area,
front/rear wheels, axles, mud guards and
fenders regularly.
Содержание XP8084
