LS tractor XP8084 Скачать руководство пользователя

Страница: 153 / 288

4 - 11

(6) Parking



Stop the tractor on a level surface, not on a slope.



Disengage PTO and place all the transmission

shift lever in NEUTRAL position.



Lower the mounted implements on the ground.



Apply the parking brake.



Stop engine and remove ignition key.



Before you leave the operator’s station, wait for

engine and all moving parts to stop.



Apply wheel chocks to the wheels when parking

the tractor on a slope unavoidably.

▶

If it is necessary to park your tractor on a slope, furthermore with a loaded trailer,

the tractor may roll down, even though the parking brake is applied. In this case,

apply the gear in low speed and apply wheel chocks or blocks to the all tires.

- Mechanical: downhill

⇒

reverse 1 gear / uphill

⇒

forward 1 gear.

- Power shuttle/shift: Appling the low speed gear is NOT available.

Caution



In case of the power shuttle or power shift models, to engage the low gear after the engine is

stopped is NOT useful for engine brake. When parking the tractor on a hill, be sure to apply

the parking brake and wheel chocks to the wheel.

Turbocharger

(7) Handling Turbocharger

(if fitted)



The turbine of the turbocharger is a highly

precise part that rotates at high speed.



Before accelerating or working the tractor fitted

with the turbocharger, allow the engine to idle at

1000 rpm for about 1 minute to ensure that the

turbocharger is correctly lubricated.



Before stopping engine fitted with the

turbocharger, allow the engine to idle at 1000

rpm for about 2 minutes. This allows the

turbocharger and manifold to cool, preventing

deformation of the components.

Содержание XP8084

































































































































































































































































































Результаты поиска

Содержание XP8084

Отзывы:

Похожие инструкции для XP8084

Бренды по названию

Популярные бренды

LS tractor XP8084, Руководство оператора

Результаты поиска

Содержание XP8084

Отзывы:

Похожие инструкции для XP8084

Бренды по названию

Популярные бренды