LS tractor XP8084, Руководство оператора

Страница: 73 / 288

3 - 3
1
Tachometer

The tachometer shows the engine revolutions
per minute (“10” means 1000rpm). The display
will return to zero when the engine is not running.
2
Turn signal indicator (Left / Right)
 These indicators will be turned on/off when operating the power shuttle lever to FORWARD /
NEUTRAL / REVERSE position in power shuttle transmission.
3
Forward/Neutral/Reverse indicator(optional)
4
High beam indicator
5
Parking brake indicator
 This indicator will be turned on when applying the parking brake. If shifting the F/R shuttle lever
forward or reverse when the parking brake is engaged, this indicator will blink with alarming buzzer.
Do not drive the vehicle in the state that the parking brake is applied.
6
Differential lock indicator
7
Engine coolant temperature gauge
2
5
6
1 4
3

When turning on the high beam of the headlamps, this indicator will be turned on simultaneously. Do
not turn on the high beam when a vehicle comes in the opposite lane.
 When turning on the turn signal lights with the
combination switch, the front/rear turn signal
lights and this indicator will blink simultaneously.
The key switch has to be in the “ON” or “Start”
positions. Before turning the vehicle while
driving on the road, turn on the turn signal lights.
 When turning on the hazard warning light switch,
all the turn signal light will blink simultaneously
regardless of the key switch position. Use the
hazard warning light switch in an emergency
state according to your local traffic regulation.
 This gauge indicates the engine coolant temperature during operation. It activates when the operator
turns the key switch to “ON” position. The gauge will register cold with the key switch in the OFF
position.
 The closer the needle approaches “
H
” mark, the higher the engine coolant temperature is. If the
needle moves to red portion of the gauge, this indicates an overheated condition. Stop the engine
immediately and check the problem.

Engine coolant is very hot. When checking the coolant,
comply with the instructions of the chapter 5-
12-(1), “Replacement of Engine coolant” in this manual.
7

This indicator will be turned on when operating the differential lock switch with the key switch placed
“ON” position. Only use the differential lock switch on a slippery field ground.