
1 - 17
(2) Notices when starting Engine
Check each part with reference of “5. Lubrication
and Maintenance” in this manual. If necessary,
repair or replace it immediately.
Especially,
check if safety protection structures or
covers are attached originally and the bolts
and nuts are tightened well.
Before starting,
check again if there are other
workers or children around the tractor and
implements and keep a safe distance.
Start engine and operate the tractor
after sitting
on the driver’s seat
with a securely fastened
seat belt.
Place the shuttle lever, transmission gear lever
in NEUTRAL and especially check if parking
brake is applied.
Lower the implements on the ground.
Ensure that rear view mirrors and the other
mirrors (if fitted) are adjusted correctly, and
check the operation of the headlights and other
lights.
For driver’s safety, to prevent an unintentional
start, movement and operation, several and
various start-safety interlock devices may be
equipped on your tractor. And, these installation
may need to do correct operation and follow the
procedure strictly. Read carefully chapter 4-2,
“Engine start and stop” in this manual before
trying to start engine.
Do not short across the starter motor terminals
to start engine. It may cause a sudden start and
serious injury or death.
Warning
▶
Do not start the engine in a closed area. The poisonous exhaust gas can cause
fatal damage to the driver or persons around.
Starter motor
Содержание XP8084
