LS tractor XP8084, Руководство оператора

Страница: 225 / 288

5 - 37
(2) Changing Front axle oil
①
Center housing

Stop the tractor on a level surface and apply
parking brake.

Clean air-breather and the surrounding area.

Set a container under the drain plug.

Remove oil filling inlet plug first, and drain plug.

Drain oil completely, and clean with care and
tighten the drain plug.

Add new oil into the oil filling inlet with checking
if the oil flows out through the oil check port.

Clean with care and tighten the oil check port
plug.

For oil specification, see chapter 5-3, “Lubricants
and Capacity” or the last page in this manual.
Oil filling inlet & check port
Oil drain position
Drain plug
②
Final gear cases

Stop the tractor on a level surface and apply
parking brake.

Set a container under the oil plug of the final
gear case.

Before draining oil, rotate the wheel end so that
the oil plug is at the highest position.

Partially unscrew the oil plug to release possible
pressure.

Place the oil plug downward and remove the oil
plug. Drain oil completely.

Add new oil into the oil filling inlet with checking if
the oil flows out through the oil check port.

If necessary, wrap the sealing tape on the oil
plug, and tighten the oil plug.

For oil specification, see chapter 5-3, “Lubricants
and Capacity” or the last page in this manual.
Oil filling inlet & check position
Air-breather
Oil plug
▶
Before draining oil, partially unscrew the oil plug to release possible pressure at
the highest position of the oil plug.
Caution