LS tractor XP8084, Руководство оператора

Страница: 224 / 288

5 - 36
Open
Close
Packing
Drain plug
②
Replace Engine oil filter

Clean carefully around the filter.

Coat clean engine oil on the packing of new filter
and check the packing is placed well in the
groove.

Turn the oil filter counter-clockwise to remove it
with filter wrench.

Turn the new filter clockwise to assemble it until
the packing makes contact with the mounting
surface. Tighten ¾ to 1 turn more after packing
contact.

If the metal is attached to the element of oil filter
to be disassembled, contact your authorized
local dealer.
▶
When engine oil is warm, the
impurities can be drained
completely.
Notice
①
Drain Engine oil

Run engine for a few minutes to warm oil.

Park the tractor on a level surface.

Remove both LH and RH drain plugs of oil pan
and drain the oil completely.
5-9. Every 600 hour check
(1) Replacing Engine oil and Filter
Oil filling inlet
③
Fill Engine oil

Tighten the drain plugs.

Add new engine oil as its capacity and check the oil level is between “MIN” and “MAX” marks on the
gauge. For oil specification, see chapter 5-3, “Lubricants and Capacity” or the last page in this
manual.

Check any leakage of the engine while running the engine for several minutes at idle rpm.

Stop the engine. After several minutes later, check again the oil level is between “MIN” and “MAX”
marks on the gauge.

Install the oil level gauge.
Engine oil filter