LS Industrial Systems SV-iE5 Series, Руководство пользователя, Страница: 29 / 127

Chapter 5. Loader
5-7
5.5
How to set parameters
z
Parameter change in Drive Group
Changing acceleration duration from 5.0 to 16.0 seconds
SHFT SHFT
FUNC
FUNC
Drive group
1
-. It displays the target frequency, the 1st code of Drive Group.
-. Press UP(
S ) key.
2
-. It displays ACC, the acceleration duration, the 2nd code of Drive Group.
-. Press Function(FUNC) key.
3
-. SET lamp lights up.
-. 0 in 5.0 blinks, which means that the digit may be changed.
-. Press Shift(SHFT) key.
4
-. The digit to change is moved to the first digit.
-. Press UP(
S
) key.
5
-. The digit to change is increased, being changed to 6.0.
-. Press Shift(SHFT) key.
6
-. The digit to change is moved the tenth digit.
-. Press UP(
S ) key.
7
-. It displays 16.0.
-. Press Function(FUNC) key.
-. 16.0 blinks wholly.
1)
-. Press Function(FUNC) key. ACC duration of 16.0 seconds is entered.
8
-. SET lamp is out
-. It displays ACC. ACC duration is changed to 16.0 seconds.
1)
That every digit blinks quickly while modifying a parameter means asking whether to enter a modified value. At
the moment, pressing Function(FUNC) key completes the entry. To cancel it instead of entering a parameter, press
any key such as Shift(SHFT), UP(
S ) or DOWN( T ) but Function(FUNC) key.