background image

DMD660 - OPERATING MANUAL // PAGE 5

1  GENERAL INFORMATION

Documentation for the DMD660 consists of this Operating Manual and several other documents (Other ap-
plicable documents, page
 5). Assembly personnel must read all documentation before starting assembly.   
Keep all documentation for as long as the product is in your possession. Ensure that all documentation is 
provided to subsequent owners. Go to www.logicdata.net for more information and support. This Manual 
may change without notice. The most recent version is available on our website.

1.1  OTHER APPLICABLE DOCUMENTS

This Operating Manual is part of the documentation required to safely assemble and operate the DYNAMIC 
MOTION SYSTEM (DM System). Other applicable documents include:

•  DYNAMIC MOTION System Manual
•  Datasheet and Operating Manual for the installed User Interface  (Handset or other)
•  Datasheet for the installed Power Unit

1.2  COPYRIGHT

© July 2018 by LOGICDATA Electronic und Software Entwicklungs GmbH. All rights reserved, except for 
those listed in Chapter 1.3 Royalty-free use of images and text on page 5.

1.3  ROYALTY-FREE USE OF IMAGES AND TEXT

After purchase and full payment of the product, all text and images in Chapter 2 “Safety”, may be used free of 
charge by the customer for 10 years after delivery. They should be used to prepare end user documentation 
for Height-Adjustable Table Systems. The license does not include logos, designs, and page layout elements 
belonging to LOGICDATA. The Reseller may make any necessary changes to the text and images to adapt 
them for the purpose of end user documentation. Texts and images may not be sold in their current state, 
and may not be published or sublicensed digitally. The transfer of this license to third parties without per-
mission from LOGICDATA is excluded. Full ownership and copyright of the text and graphics remain with 
LOGICDATA. Texts and graphics are offered in their current state without warranty or promise of any kind. 
Contact LOGICDATA to obtain text or images in an editable format ([email protected]).

1.4  TRADEMARKS

Documentation may include the representation of registered trademarks of goods or services, as well as 
information about copyright or other proprietary expertise of LOGICDATA or third parties. In all cases, all 
rights remain exclusively with the respective copyright holder. LOGICDATA® is a registered trademark of 
LOGICDATA Electronic & Software GmbH in the USA, the European Union, and other countries.

Содержание DMD660

























Отзывы: