DMD660 - OPERATING MANUAL // PAGE 16
7 ASSEMBLY - THICK TUBE UP
This section describes assembly for the DMD660 into "Thick Tube Up" Height-Adjustable Columns. The
"Thick Tube Up" variant requires the installation of an Adapter Sleeve (7.1.1 Required Components).
If you are installing the DMD660 into a “Thick Tube Down” Height-Adjustable Column, skip this chapter and
continue at Chapter 8.
7.1 ATTACHING THE ADAPTER SLEEVE
In "Thick Tube Up" Height-Adjustable Columns, an Adapter Sleeve is required to connect the Actuator to the
Middle Tube Adapter in the Height-Adjustable Column.
This section describes the attachment process for the Adapter Sleeve. If your DMD660 Actuator has a
LOGICDATA pre-assembled Adapter Sleeve, skip this section and proceed to Chapter 7.2.
7.1.1 REQUIRED COMPONENTS
1
DMD660 Actuator
2
Adapter Sleeve and Fixing Ring
1
2
