DMD660 - OPERATING MANUAL // PAGE 17
7.1.2 PROCESS
To attach the Adapter Sleeve:
1. Properly lubricate the Actuator's Spindle Nut to minimize friction between the Adapter Sleeve
and the DMD660. Consult LOGICDATA for a list of recommended lubricants.
2. Slide the Adapter Sleeve along the Actuator so that it snaps into place at the Motor End.
Ensure all flaps have been snapped into place.
3. Slide the Fixing Ring along the Actuator and snap it into place at the top of the Adapter Sleeve.
This will fix the Adapter Sleeve into place.
4. Rotate the Adapter Sleeve to ensure that it can turn smoothly and quietly
NOTICE
Ensure the Fixing Ring has been mounted correctly. It should not project out from the
outside edge of the Actuator. Attaching the Fixing Ring in the wrong direction may
damage the system.
A
A
B
B
C
C
D
D
E
E
F
F
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
Lubricate here
